Kubota STV series machines and attachments
Kubota STV
Professional attachments suitable for front mounting to compact tractors and up-front mowers fitted with front linkage/PTO. The machines are fitted with cat.1 linkage/triangle or optional dedicated linkages commonly found on up-front mowers.Many items are offered with the options of mechanical PTO or hydraulic drives.
This range of sweepers are fitted with a 40cm diameter brush.
Kersten FKM 1275 Sweeper mounted on a tractor using original front linkage and front PTO. This sweeper is fitted with a collector and a side gulley brush. The gulley brush (part 1300 700) is operated by an independent hydraulic system mounted on the sweeper. This kit includes a pump, driven from the sweeper gear box, reservoir and operating/speed regulating valve. The side gulley brush may also be fitted to a hydraulic drive sweeping machine. In this case, the gulley brush may be fitted in the sweeper drive circuit which would be powered by the tractor hydraulic system. The hydraulic system would require an oil flow of at least 15 litres/minute. The sweeper may be angled from left to right manually or with the optional hydraulic cylinder.
 |
FKDR/Hydraulic Front linkage kit | For the front of ride-on mowers including; Quick-attach implement hitch, manual implement lift/lower, manual implement angling, hydraulic pump, tank and valve with variable flow control to operate front sweeping machine. |
| Attachments for FKDR | ||
 |
FKM 900 HA | 90cm Front Sweeping Machine Hydraulic quick-attach sweeper with manual angling, side drive hydraulic motor • Fully adjustable for height and angle • 32cm∅ Suitable for sweeping hard and soft surfaces including artificial sports surfaces. Also available in 100cm and 125cm widths. |
 |
0900 200 | 90cm Front Brush Guard Also in 100cm and 125cm widths |
 |
0900 300 | 90cm Collector Box Also in 100cm and 125cm widths |
 |
1050 400 | 40 cm Gulley Brush Also available with hydraulic drive |
 |
1000 510 | Dust Suppression Sprayer 5 litre capacity |
 |
1000 600 | Garage stands for HA Sweepers For use whilst in storage. Prevents the brush becoming misshapen and for easy moving |
 |
2000 557-1 | Hydraulic Rotary Spreader Quick-attach spreader for sand, salt and grit 70 litre. 0.5-4m adjustable spreading width. |
 |
FKM 1275 | 125cm Front Mounted Sweeper | 125cm working width with 40cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor front linkage. Specify application when ordering. |
 |
1275 350 | Hydraulic Collector Box | 125cm Hydraulic Collector Box and brackets Requires double acting hydraulic service on tractor |
|
FKM 1500 GE | Front Mounted Sweeper | 150cm Front Mounted Sweeper 150cm working width with 40cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor front linkage. Specify application when ordering. |
|
1500 350 | Hydraulic Collector Box | 150cm Hydraulic Collector Box and brackets Requires double acting hydraulic service on tractor |
 |
1300 700 | Gulley Brush | 50cm Gulley Brush– for pto drive sweepers Complete with mounting brackets. Hydraulic drive with speed control valve operated by on board hydraulic pump and tank. |
|
1300 800 | Gulley Brush | 50cm Gulley Brush – for hydraulic drive sweepers Complete with mounting brackets. Hydraulic drive with speed control valve from sweeper drive circuit or separate tractor service. |
 |
Hydraulic Drive | Hydraulic Drive Option | Hydraulic Drive Option In Lieu of Mechanical PTO Drive. FKM brushes require hydraulic flow and return with a detented (lockable) valve. 15 litres/minute |
| Front Mower Linkage Kit | Linkage kit to suit Kubota, John Deere, New Holland, JCB, Iseki, Massey Ferguson and other Up-Front Mowers. Uses original lift linkages with mower removed | ||
 |
1300 600 | Garage Stand | Garage Stand for FKM sweepers (1 centre position) |
|
1300 750 | Garage Stand | Garage Stand for FKM sweepers (2 side positions) |
|
3000 300 | Dust Suppression Sprayer | Dust Suppression Sprayer (100 litre capacity) (Rear linkage mounted, twin nozzles, 12v pump) |
|
3000 305 | Dust Suppression Sprayer | Dust Suppression Sprayer (200 litre capacity) (Rear linkage mounted, twin nozzles, 12v pump) |
 |
1275 400 | Castor Wheel | Castor Wheel for Collectors (for use on uneven ground) |
 |
2500 180 | Hydraulic Angling Kit | Hydraulic Angling Kit |
 |
1275 085 | High Speed Drive | High Speed Drive for sweeping snow (FKM1275-1500) |
 |
SchlM 120 | 120cm Front Mounted Flail Mower | Full width rear roller with height adjustment. Power take off drive including shaft and over-running clutch. Available with Y or boot type flails. Linkage for attachment to front of tractors and up front mowers (cat1/triangle). |
 |
FKR 115 | 115cm Front Mounted Drum Mower | 2 Drums with 4 blades for cutting whole crop Power take off drive including shaft and over-running clutch. Linkage for attachment to front of tractors and up front mowers (cat1/triangle). |
|
FKR 135 | 135cm Front Mounted Drum Mower | 2 Drums with 4 blades for cutting whole crop. Power take off drive including shaft and over-running clutch. Linkage for attachment to front of tractors and up front mowers (cat1/triangle). |
 |
LBV-GE | Tractor Mounted Low Noise Blower | Lightweight Dynamically balanced alloy fan, 230km/h air velocity blowing material up to 8 metres. Very low noise with inlet and exhaust baffles. Manual adjustable outlet left, front and right. Available with dedicated quick hitches or Cat 1 linkage. Front or rear mounting on request. PTO drive or hydraulic drive –requires 20 litres/minute oil flow. Please specify application. Requires front mower linkage kit (page 28) when used on up-front mowers. |
| LBV-Hutze | Powered 360° outlet chute for blower—requires hydraulic service. | ||
 |
SF 1355 | 130cm Front Mounted Snow Plough | 130cm x 45cm hinged blade on mounting frame with adjustable tension springs and rubber cutting edge. Hydraulic angling, left and right. Skid plates for height adjustment. Linkage for attachment to front of tractors and up front mowers (cat1/triangle). |
 |
UB500KM | Front Mounted 50cm Weedbrush | Power take off drive, CAT1 linkage/A-frame mounting. Manual height adjustment, hydraulic brush angle adjustment, left and right, fore and aft. Including 50cm Rotor with 10 x Kersten Versa-brushes. Round plait brushes available on request. Requires front mower linkage kit (page 28) when used on up-front mowers. |
| ST UB | Hydraulic Control Valves | Hydraulic Control Valves with remote electric operation suitable for UB500KM front mounted Weedbrush. |
Attachments for tractors from 28hp.
|
FKM 1300 | 130cm Front Mounted Sweeper | 130cm working width with 50cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor/mower linkage. Specify application when ordering. |
|
1300 350 | Hydraulic Collector Box | 130cm Hydraulic Collector Box and Brackets |
|
FKM 1475 | 147cm Front Mounted Sweeper | 147cm working width with 50cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor/mower linkage. Specify application when ordering. |
|
1475 350 | Hydraulic Collector Box | 147cm Hydraulic Collector Box and Brackets | |
FKM 1650 | 165cm Front Mounted Sweeper | 165cm working width with 50cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor/mower linkage. Specify application when ordering. |
|
1650 350 | Hydraulic Collector Box | 165cm Hydraulic Collector Box and Brackets |
|
FKM 1900 | 190cm Front Mounted Sweeper | 190cm working width with 50cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor/mower linkage. Specify application when ordering. |
|
1900 350 | Hydraulic Collector Box | 190cm Hydraulic Collector Box and Brackets |
|
FKM 2250 GE | 225cm Front Mounted Sweeper | 225cm working width with 50cm diameter nylon brush, Manual angling adjustment, Power take off drive Manual height adjustment. With brackets to suit tractor/mower linkage. Specify application when ordering. |
|
2250 350 | Hydraulic Collector Box | 225cm Hydraulic Collector Box and Brackets |
 |
1300 700 | Gulley Brush | 50cm Gulley Brush– for pto drive sweepers Complete with mounting brackets. Hydraulic drive with speed control valve operated by on board hydraulic pump and tank. |
|
1300 800 | Gulley Brush | 50cm Gulley Brush – for hydraulic drive sweepers Complete with mounting brackets. Hydraulic drive with speed control valve from sweeper drive circuit or separate tractor service. |
|
Hydraulic Drive | Hydraulic Drive Option | Hydraulic Drive Option In Lieu of Mechanical PTO Drive. FKM brushes require hydraulic flow and return with a detented (lockable) valve. 15 litres/minute |
|
1300 600 | Garage Stand | Garage Stand for FKM sweepers (1 centre position) |
|
1300 750 | Garage Stand | Garage Stand for FKM sweepers (2 side positions) |
|
3000 300 | Dust Suppression Sprayer | Dust Suppression Sprayer (100 litre capacity) (Rear linkage mounted, twin nozzles, 12v pump) |
|
3000 305 | Dust Suppression Sprayer | Dust Suppression Sprayer (200 litre capacity) (Rear linkage mounted, twin nozzles, 12v pump) |
|
1275 400 | Castor Wheel | Castor Wheel for Collectors (for use on uneven ground) |
|
2500 180 | Hydraulic Angling Kit | Hydraulic Angling Kit |
|
1275 085 | High Speed Drive | High Speed Drive for sweeping snow (FKM1275-1500) |
|
UB500 M | Front Mounted 50cm Weedbrush | Power take off drive, linkage/A-frame mounting. Manual height adjustment, hydraulic brush angle adjustment, left and right, fore and aft. 50cm Rotor with 10 x Kersten versa-brushes or 10 x Hausa Brushes. Please specify at time of order |
|
UB700 M | Front Mounted 70cm Weedbrush | Power take off drive, linkage/A-frame mounting. Manual height adjustment, hydraulic brush angle adjustment, left and right, fore and aft. 70cm Rotor with 12 x Kersten versa-brushes or 10 x Hausa Brushes. Please specify at time of order |
|
Hydraulic Drive | Hydraulic Drive for UB5/700 | In Lieu of PTO Requires hydraulic flow and return with a detented (lockable) valve. Hydraulic drive requires 20 litres /minute |
| Front Mower Linkage Kit | Linkage kit to suit Kubota, John Deere, New Holland, JCB, Iseki, Massey Ferguson and other Up-Front Mowers. Uses original lift linkages with mower removed | ||
